| 首页 > Canton Fair Data (广交会买家名录) > 广交会采购商名录 | |||
| RFQ PARALLEL & SQUARE GROUND STOCK | |||
| 发布时间： 2024-6-28 浏览：143 | |||
|
发 布 人：todaytex 发布人电子邮件：1407106692@qq.com 联系网址：http://www.todaytex.com |
|||
|
公司：RFQ PARALLEL & SQUARE GROUND STOCK 国家：** 联系人：** 地址： This is an inquiry message about RFQ PARALLEL & SQUARE GROUND STOCK in the 108th China Canton Fair. (这是一条买家关于"RFQ PARALLEL & SQUARE GROUND STOCK"的询盘信息，来自第108届中国广交会。)Inquiry Message (询盘信息) RFQ PARALLEL & SQUARE GROUND STOCK Hope things are going well for Patriot Steel. I am looking for a somewhat unusual pricing request. We are building a traveling take-up unit for our Coaxial Cable production equipment. Part of this arrangement is a carriage running on THK Precision Rails and Cross Roller Bearings. I need material to mount the rails on that will give the correct finished height and parallel & perpendicular alignment without a lot of muse and fuse from our shop. I am looking for the most reasonably priced and processed material that can provide adequate flatness, parallelism and perpendicularity. Dimensionally I need three pieces as follows: (3) 1.500+/-010” X 3.500+/-.010” X 48+/-1/8” Flatness, Parallelism & Perpendicularity as follows: 1.500” Flat & Parallel within .001”/12” Length 3.500” Flat & Parallel within .001”/12” Length & 3.500” equal within .002” on all three pcs. 1.500” & 3.500” Perpendicular within .005” CRS, HRS or a Tool Steel grade would be acceptable. For example if you can provide Blanchard Ground HRS or 1.500” thick A-36 Stripper Plate to the specification fine, but if A2 oversized flat material Precision Ground would actually be easier and more economical that would work as well. I believe these specs are closer than for normal Blanchard Ground expectations over the 48” Length. Is this feasible and reasonable or am I all wet? If not easily achieved what are your standard Stripper Plate specifications? I can be reached directly at the contact information below with any questions or concerns. Thank you for your time and effort in this regard. Regards, Dave Garges Design Engineer Micro-Coax, Inc. 206 Jones Blvd. Pottstown, Pa. 19464 phone: 610-495-4323 fax: 610-495-6656 email: DGGarges@micro-coax.com Contact Info (联系信息) David Garges 19464 Company: Micro-Coax, Inc. E-mail: dggarges@micro-coax.com dggarges@micro-coax.com 电话：** 传真： ** 邮箱：** 网址：** 采购本类产品及：** |
|||